Time, Date & Language; Date Format; System Shutdown - Dedicated Micros Eco4 Guide D'installation

Time, Date & Language
Time, Date & Language Date
Time

Date Format

Language

System Shutdown

DST
Date
As default, the date is entered DD:MM:YYYY on PAL models and MM:DD:YYYY
on NTSC models, this can be changed using the Date format option below.
Time
The time should be entered in 24 hour format (HH:MM).
Note: Summer and Winter time is signalled by an 'S' or 'W' next to the time.
Date format
The date format can be changed from Day, Month to Month, Day depending on
regional preference.
Language
The menus can be displayed in a number of languages. Upon selection these are
presented as a dropdown list.
Available languages are: English, French, German, Spanish, Italian, Chinese,
Russian, Czech, Polish, Dutch, Hungarian, and Swedish.
10
01/05/2002
S 12:00
Day, Month Month, Day
English Français, Deutsch, Espanól, Italiano
Disabled Enabled
Auto Manual
System Shutdown
If the Eco4 needs to be switched off for any reason, the shutdown procedure
needs to be followed:
1. Select 'Enabled' in the System Shutdown option.
2. When the pop-up menu appears, press and hold camera 1 for five seconds to
shutdown.
3. The message 'It is now safe to switch off your unit' is displayed, switch the
Eco4 off at the wall.
WARNING: Data loss or disk failure may occur if a system shutdown is not
performed before removing power.
DST
Daylight saving time can be adjusted automatically or manually. By default, the
automatic setting will go forward one hour on the last Sunday in March at 01:00,
and one hour back last Sunday in October at 02:00. The default automatic
settings can be changed.
Important: If the country or region where the unit is located does not use DST
then select manual.