Record Options - Dedicated Micros Eco4 Guide D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24

Record Options

Record Options
Timed expiry
Alarm protection
Pre-alarm protection
Post-alarm protection
Protected images
Timed expiry
The timed expiry option allows images to be held on the disk for a selected
number of days or hours. Images on the disk which are older than this time
cannot be accessed. By default there is no timed expiry. This option can be used
to prevent the unit recording over 30 days for example.
Alarm protection
Global alarms can be protected automatically as they are received. If no alarms
are to be protected, select Disabled.
Pre-alarm protection
This is the amount of time the images are protected before the Global alarm is
triggered. By default this setting is 15 minutes, but this is adjustable from 00
minutes (no pre-alarm protection) to 60 minutes.
Post-alarm protection
This is the amount of time the images are protected after the Global alarm has
ended. By default this setting is 15 minutes, but this is adjustable from 00
minutes (no post-alarm protection) to 60 minutes.
Protected images
Selecting this option allows images to be protected or unprotect manually
16
Edit
Disabled
Global
15 minutes
00 minutes - 60 minutes
15 minutes
00 minutes - 60 minutes
Edit
To protect images:
1. Enter the time of the first image to be protected (in the From area).
2. Enter the time of the last image to be protected (in the To area).
3. Select 'Confirm' in the Protect images option.
4. The selected images are protected and placed in the list.
To un-protect images:
1. Enter the time of the first image to be protected (in the From area), or
highlight an image in the list and press Camera 1.
2. Enter the time of the last image to be protected (in the To area), or highlight
an image in the list and press Camera 2.
3. Select 'Confirm' in the Unprotect images option.
4. The selected images are unprotected and removed from the list.
Note: If you try to unprotect a sequence of images before they are all protected,
if you are protecting a large number of images for example, some of the images
may be left in the list. It may be necessary to wait a few minutes for the
remaining images to be protected before un-protecting them.

Publicité

Table des Matières
loading

Table des Matières