Dedicated Micros Eco4 Guide D'installation page 22

Viewing cameras on the Spot monitor
Press the mode key to toggle 'spot' mode, indicated on the main monitor and
the front panel LED.
Press a camera key to display that camera on the spot monitor or tap the
sequence key to sequence the cameras.
Copying images to CD
To copy images to the external CD writer (if connected):
1. Insert a blank CDR or pre-formatted CD-RW into the CD writer.
2. Go to the first point from where you want to copy images from using the
key or the GOTO function,
3. Press COPY.
4. Use the , or keys to go to the last image you want to copy, or use the
GOTO key.
5. Press COPY again. The following screen is displayed:
Copy Images
Copy destination
Copy from time
Copy to time
Copy
1 2 3
9 10 11 12
Copy destination This is the name and type of CD drive connected to the
SCSI port.
Copy from time Select the time you wish to copy images from.
Copy to time Select the time you wish to copy images to.
Copy Select 'All cameras' or individual cameras to copy using
the camera keys (filled boxes are selected cameras,
unfilled boxes are not selected).
20
CD0: SCSI Yamaha
12:01:00 01/12/2001
12:02:00 01/12/2001
Selected cameras Selected cameras
4 5 6 7 8
13 14 15 16
TIP: You can display this page directly by pressing and holding the COPY key and
enter the copy time manually, rather than the first and last image.
Once the 'Copy images' page is complete, press the menu key to display the
following menu:
This menu displays the archive list of images to be copied to the CD, the 'CD Use'
bar indicates the how much space is available on the CD, once it reaches 100%
no more images can be added to the archive.
CDR Archive
CD Type – 656MB CD
CD Use [--+---------------] 4% Full
From To
12:00 01/12/01 12:01 01/12/01
Next 12:01 01/12/01 to 12:02 01/12/01
Add next Add next Clear list Create CD Verify CD
Add next Add the selected times to the archive list.
Clear list Removes all entries from the list.
Create CD Creates a CD with the images in the list.
Verify CD Verify that the CD has been written correctly.
To select any of the above options, highlight the option and tap menu.
To add images to the CD:
1. Select 'Add next' and press the menu key to add the displayed time to the list.
2. You may wish to add more images to the CDR archive if the CD is not yet full.
To select more images to add to the list press
images' screen.
3. Once all the required images are added to the archive list, select 'Create CD'
and press the menu key to create the CD. The CD will eject once the CD has
been created.
4. The CD can be reinserted and verified if required using the 'Verify CD' option.
5. Press and hold the menu key to exit the CDR Archive option.
Cameras
123456789
to return to the 'Copy