Replace The Activated Carbon Filter And The Hepa Filter - Philips AC4086 Mode D'emploi

Replace the activated carbon
filter and the HEPA filter
Note
•
The activated carbon and the HEPA filters are
not washable nor vacuum cleanable.
Replace both the activated carbon filter and the
HEPA filter when the filter light
Tip
•
When you remove or insert filters, place the
appliance against a wall for more stability.
Note
•
Insert the filters in the correct position.
•
Make sure that you place the filters in the order
of HEPA filter, activated carbon filter, Multi-care
filter, and finally the pre-filter.
•
Make sure that the side with the tag is pointing
towards you.
1
Switch off the appliance and unplug it.
flashes.
2
Place your fingers in the recesses of the
side panels.
3
Gently pull the bottom of the panel out
(1), then lift the top part of the front panel
towards you (2).
4
Remove all filters from the appliance.
5
Take the used filters by both sides and
gently deposit them into the house hold
trash bin.
2
1
EN 27