Product Description And Specifications - Bosch GRO 12V-35 Professional Notice Originale

OBJ_BUCH-2916-001.book Page 17 Tuesday, July 12, 2016 1:56 PM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is intended for cutting metal and stone materi-
als, and for grinding, sanding and polishing metal and painted
surfaces without the use of water. In addition to this, the pow-
er tool is suitable for drilling in wood, soft metal, plastic and
light building materials when used with the appropriate ac-
cessories.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Cutting disc
2 Holding rod
3 Grinding accessory*
4 "PowerLight"
5 Spindle lock
6 On/Off switch
7 Speed regulator
8 Battery charge-control indicator
9 Battery pack
10 Direction-of-rotation arrow for grinding spindle
11 Dust protection cap (for detailed work)
12 Clamping nut
13 Collet of the collet chuck
14 Handle (insulated gripping surface)
15 Inner shank dimension L
0
16 Battery unlocking button
17 Open-end spanner/Screwdriver
18 Shank
19 Collet
20 Drive spindle
21 Dust protection cap (for working close to surfaces)
* The accessories illustrated or described are not included as
standard delivery.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-23.
Typically the A-weighted sound pressure level of the product
is 74 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Bosch Power Tools
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-23:
2 2
a =9 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Technical Data
Cordless multi rotary tool
Article number
Rated voltage
Rated speed
Collet chuck-Ø
Spanner flat of collet chuck
Max. outer diameter:
– Cutting disc
– Grinding accessory
– Wire brush
– Grinding disc
– Drill bit
Max. inner shank dimension L
0
Max. shank length
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
*
– during operation and during
storage
Recommended batteries
Recommended chargers
Technical data determined with battery from delivery scope.
* Limited performance at temperatures <0 °C
English | 17
GRO 12V-35
3 601 JC5 0..
V= 12
-1
min 5000–35000
mm 3.2
mm 9.55
mm 38
mm 22.5
mm 20
mm 20
mm 3.2
mm 10
mm 35
kg 0.63–0.87
°C 0...+45
°C –20...+50
GBA 12V...
GBA 10.8V...
GAL 12.. CV
AL 11.. CV
1 609 92A 3B4 | (12.7.16)