Emptying The Dust Container; Service And Maintenance; Accessories - Festool CT 36 E AC HEPA Notice D'utilisation D'origine

English
► Wind up the mains power cable.
► Empty the dust container.
CAUTION
Hazardous dust
Damage to the respiratory passage
► Wipe down the mobile dust extractor and
clean all accessories thoroughly using the
extractor (inside and out) before removing
from the working area.
► Parts that you were not able to clean thor­
oughly must be sealed in an airtight plastic
bag prior to transportation.
► Wear a dust mask!
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.

11.1 Emptying the dust container

The dust container [2-3] can be emptied once
the top section has been removed.
► After extracting fluids, clean the fill level
sensors [10-1] regularly with a soft cloth
and inspect for damage.
10
10-1

12 Service and maintenance

WARNING
Any maintenance or repair work that re­
quires opening of the motor or gear housing
should only be carried out by an authorised
Customer Service Centre (name supplied by
your dealer)!
► Maintenance or repair work carried out by
an unauthorised person can lead to the
wrong connection of the power leads or
other components, which in turn can lead
to accidents with serious consequences.
16
10-1
WARNING
To prevent accidents, always remove the
plug from the power supply socket before
carrying out any maintenance or repair work
on the tool!
► Do not use compressed air to clean the
electrical tool! Do not try to clean parts in­
side the tool in this way, as you could let
foreign objects in through the openings of
the tool housing.
A dust test must be performed at least once a
year by the manufacturer or an instructed per­
son. This test may include checks to determine
whether the filter is damaged, the machine is
sealed properly and the monitoring features
are functioning correctly.
During maintenance and repair work, all com­
ponents that cannot be cleaned satisfactorily
must be replaced. The old components must be
sealed in impermeable plastic bags prior to dis­
posal in compliance with applicable regulations
for this type of waste.
Customer service and repair only through
manufacturer or service workshops: Please
find the nearest address at:
www.festoolusa.com/service
EKAT
4
5
3
2
1
Use only original Festool spare parts! Order No.
at: www.festoolusa.com/service

13 Accessories

Use only original Festool accessories and
Festool consumable material intended for this
machine because these components are de­
signed specifically for the machine. Using ac­
cessories and consumable material from other
suppliers will most likely affect the quality of
your working results and limit any warranty
claims. Machine wear or your own personal
workload may increase depending on the appli­
cation. Protect yourself and your machine, and
preserve your warranty claims by always using
original Festool accessories and Festool con­
sumable material!