Emptying The Dust Container; Accessories; Eu Declaration Of Conformity - Festool CTH 26 E/a Notice D'utilisation D'origine

CTH
GB

Clean any dust deposits from the area behind
the main filter.

Insert a new main filter in the frame.

Insert the retainer [9-2]with the main filter and
fold over the lever [9-4] until it engages in posi-
tion.

Tighten the safety screws[9-3].

Replace the top section [2-1] and close the
locking clips [2-2].
9.2

Emptying the dust container

The dust container [2-3] can be emptied once the
top section has been removed.

After extracting fluids, clean the fill level sen-
sors [10-1] regularly with a soft cloth and in-
spect for damage.
10

Accessories

The order numbers for the accessories and filters
can be found in the Festool catalogue or on the In-
ternet at "www.festool.com".
10.1 Modules
The following modules for upgrading the mobile
dust extractor are available in the accessories pro-
gramme. Modules must be fitted to the module slot
[1-3] by an authorised service workshop:
– Compressed air module,
– Socket module with permanent power supply,
– Socket module with automatic switch-on unit
(not suitable for GB 110 V version),
– Energy box module (EAA) for using the automatic
switch-on unit on the EAA.
You can find more detailed information on the mod-
ules at "www.festool.com".
11 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble national regulations.
20
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh: www.festool.com/reach
12

EU Declaration of Conformity

Mobile dust
extractor
CTH 26 E/a
CTH 48 E/a
Year of CE mark: 2010
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following directives, standards and normative
documents:
2006/42/EC, 2004/108/EC (up to 19.04.2016), 2014/
30/EU (from 20.04.2016), 2011/65/EU, EN 60335-1,
EN 60335-2-69, EN 55014-1, EN 55014-2, EN
61000-3-2, EN
1:2006+A1:2009+A2:2011, EN 55014-2:1997+Corri-
gendum 1997+A1:2001+A2:2008, EN 61000-3-
2:2006+A1:2009+A2:2009, EN 61000-3-3:2013.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Wolfgang Zondler
Head of Research, Development and Technical
Documentation
2015-07-22
Serial no.
496162, 498530, 498531
496163
61000-3-3, EN 55014-