Rane Seventy-two Guide D'utilisation page 19

Fader FX
In Fader FX Mode, the pads will mute and unmute the
deck's audio signal in a way that emulates crossfader
movements toward that deck. A "click" is a
movement of the crossfader toward a deck ("open")
and then away from that deck ("closed"). DJs use
clicks in different rhythmic patterns (often in
conjunction with scratching) to create various effects.
Note: Fader FX are based on the current track's
BPM. Since some scratch sound files may not
accurately display the BPM, set the BPM manually
for the desired sound.
To enter Fader FX Mode, press Sampler / Fader FX so that it lights green.
To trigger a fader effect, press one of Pads 1–8.
To reverse an effect, hold Shift and press one of Pads 1–8.
Flip
If you have purchased the Serato Flip Expansion
Pack, you can access the Flip control by holding
Shift and pressing Sampler / Fader FX (4). If you
have not purchased the Flip Expansion Pack, this will
be available as a Custom Pad mode.
In this mode, unlit pads have no Flip assigned to
them; pads lit blue have a Flip assigned but are not
playing; pads lit orange have a Flip assigned and are
currently playing.
To assign a Flip to a pad, press an unlit pad (1-6).
To play an assigned Flip, press the corresponding blue lit pad (1-6).
To immediately stop playback of a Flip, hold Shift and then press the corresponding orange lit
pad (1-6).
To start Flip recording, press the left Parameter  button.
To return to the start of the selected Flip, press the right Parameter  button.
To toggle the Flip Slot Loop, hold Shift and then press the left Parameter  button.
To toggle the Flip Slot on and off, hold Shift and then press the right Parameter  button.
2
1
1-Click 2-Click
Flare Flare
5 6
2-to-1
Trans-
Alternator
formers
Baby
Flip 1 Flip 2
Flip 5 Flip 6
3 4
3-Click 4-Click
Flare Flare
7 8
Tri-forms Uzi
Flip 3 Flip 4
No No
Function Function
19