Rane Seventy-two Guide D'utilisation page 15

Pad Modes
This chapter describes the different pad modes. Each
deck has eight pads, which are always in one of these
modes, and each deck's pads can be in a different
mode. Press one of the Pad Mode buttons to enter the
corresponding pad mode on that deck. Each pad mode
button will alternate between two modes with each
press.
Tip: In each pad mode, press Shift and one of the Pad
Mode buttons to access additional modes or use
custom modes.
With Pad Mode Display on, pressing a Pad Mode button will display the
function of each Performance Pad when operating within the selected
mode. This display will appear at the bottom of the Touchscreen, if you
are in Waveform View, Effects View, or the Touch FX screen. Tap
anywhere in this display to retain it on the Touchscreen, or it will
disappear after 5 seconds. See
feature on or off.
Cue
In Cue Mode, each pad assigns a hot cue point or returns the track to that hot cue point.
To enter Cue Mode, press Cue / Pitch Play so that it lights white.
To assign a hot cue point, press an unlit Pad at the desired point in your track. The pad will light
up when it is assigned (with the corresponding color, if available).
To jump to a hot cue point, press a lit Pad.
To delete an assigned hot cue point, press Shift and the corresponding pad.
Main Menu to learn how to turn this
1 2
3
5 6 7
4
8
15