Vetus BS1252 Instructions D'installation page 12

Installation
Location of the battery splitter
Choose a dry place well away from any heat source. Position the battery splitter as central
as possible between the batteries, the alternator and the battery charger.
Do not place the battery splitter immediately above a battery; sulphur fumes from the bat-
tery can damage the electronic components.
Do not mount the battery splitter on engine!
Connecting
For wiring diagrams see page 50.
Diagram Alternators
1
2
3
4
5
6
7
8
Extensions:
9 Battery charger charges 2 batteries via battery splitter 1252.
10 Battery charger charges 3 batteries via battery splitter 1253.
11 Battery charger with built-in dual battery splitter charges 2 batteries via built-in
battery splitter.
12 Battery charger with built-in dual battery splitter charges 3 batteries via battery
splitter 1253, the built-in battery splitter is not used.
13 Battery charger with built-in dual battery splitter charges 2 batteries via battery
splitter 1252 and 1 battery via built-in battery splitter.
14 Installation with an ammeter to indicate charge current, an ammeter to indicate
discharge current and a voltmeter.
15 Connection of alternator warning light
10
090305.04
Batteries
1 2
1 2
1 3
1 3
2 2
2 2
2 3
2 3
Battery splitter
1 x 1252
1 x 1252
1 x 1253
1 x 1253
2 x 1252
2 x 1252
2 x 1253
2 x 1253
Remarks
+ 1 Battery switch *
+ 2 Battery switches *
+ 1 Battery switch *
+ 2 Battery switches *
Battery splitter