ACteon SOPROCARE Manuel D'utilisation page 32

An image displays on the
screen, but the quality is not
satisfactory.
An image displays, but it is not
really clear (blurry)
The camera should be sent to us in its totality (connection box, handpiece, cables). Please enclose your packing list with a brief
explanatory note relative to the noticed defect.
If some parts constituting the camera happen to break, it is imperative to send in everything so that the defective parts can be
replaced.
When your material is returned to you, you should check its condition and note any discrepancies on the delivery slip, if necessary.
You will then have 48 hours to confi rm by registered letter sent to the carrier. After 48 hours, the carrier will be able to deny these
discrepancies.
If any material we sent was damaged during transportation, the repair charges will be billed either to the carrier (if the discrepancies
were made within the period) or to the recipient. Check as soon as possible that all material is correctly working.
E N G L I S H
Camera driver confi guration
• Rotating ring.
• Hygienic protector.
Check the camera confi guration in the Sopro Imaging
software (brightness, contrast, saturation, etc.).
Please refer to Sopro Imaging user's manual.
1. Check the rotating ring is correctly positioned
(Extra oral, Intra oral, CARE, macro).
2. Check the hygienic protector is correctly positioned
on the camera head.
SOPROCARE • User's manual
31