Honeywell IAQ Probe Manuel De L'utilisateur page 45

Set Time
Clicking on the Set Time option opens the Internal Clock Settings
window that lets you correct the time on the IAQ Probe, ensuring that
there are no discrepancies between acquisition location and hardware
times.
• Click "Download then set time" if you wish to save the IAQ Probe's
data and correct it's clock.
• Click "Set time now" if you wish to correct the IAQ Probe's time and
clear it's memory without uploading it.
• Click Cancel to exit this function without any changes (will not clear
the memory or set the time).
Note: If you select Download then set time and click Cancel within the
"Save data to..." window, the time will not be set and the memory
will be cleared without saving.
511403
2/07
IAQ Probe User Manual
Honeywell
IAQ Probe Software
Click Get to display the time
set on the IAQ Probe unit.
If the IAQ Probe time differs
from the actual time, use the
arrows to adjust the time and
click Set to correct the time on
the IAQ Probe.
Clicking on Set opens a
warning window.
Main Screens
43