Selecting Temperature Type; Temperature Adjustment - Honeywell IAQ Probe Manuel De L'utilisateur

Selecting Temperature Type

The IAQ Probe can be set to display temperature readings in either
degrees Farenheit or degrees Celcius:
1. Press Mode/ESC to access the main menu.
2. Use the arrows to scroll to the °C/°F Menu and press Enter to
select.
3. Use the arrows to display either ºC or ºF and press Enter to select.
4. Press Enter to confirm the selection and return to the main menu.
5. Press Mode/ESC to exit the menu.

Temperature Adjustment

The IAQ Probe temperature menu also provides access to both the
humidity sensor controls. This menu allows you to adjust both the
temperature and humidity values:
1 Press Mode/ESC to access the main menu.
2 Use the arrows to scroll to the °C/°F menu and press Enter to
select.
3 Once in the °C/°F menu, press and hold Enter
for three seconds. Adj will appear on the
screen.
4 Press Enter to select the adjustment function.
5 Use the arrows to display either the
temperature or humidity sensor and press
Enter to select. The humidity value is
displayed
6 Press enter to edit the value (editable when
flashing). Use the arrows to increase or
decrease the value and press Enter to confirm
and save the value.
7 Repeat steps 2 to 7 for the other sensor, as
required.
8 Press Mode/Esc to exit the menu.
511403
2/07
IAQ Probe User Manual
Honeywell
%RH
23