Battery Installation And Removal; User Interface; Initialization - Honeywell IAQ Probe Manuel De L'utilisateur

Battery Installation and Removal

Installing a battery is simple:
1. Open the back battery panel
2. Position the battery (as shown) and slide upward into battery
compartment
3. When the battery clicks into position, close the back battery panel.
1 2 3
The procedure to remove a battery is identical to installation except in
reverse and with the added step of pressing the release button to slide
the battery out.

User Interface

Initialization

When first powered on, the IAQ Probe initializes, automatically detects
its sensors, and verifies active peripherals (such as memory).
The display screen can contain a great deal of information, mostly
presented in icon form.
IAQ Probe User Manual 15
511403
Honeywell
2/07