When To Change The Thread Catchers; How To Replace The Thread Lifters; Cleaning And Care - Miele SKCE0 Mode D'emploi

en-US
 With the vacuum cleaner switched
on, press the ComfortClean button
for at least two seconds.
The vacuum cleaner is switched off au-
tomatically for approx. 20 seconds and
a cleaning process is carried out which
results in operational noise.
The ComfortClean button on the vac-
uum cleaner lights up yellow.
The vacuum cleaner will then switch
back on automatically and will operate
with the previously selected setting.
We also recommend emptying and
cleaning the fine dust container once or
twice a year (see "Frequently asked
questions – Cleaning the fine dust filter
manually").

When to change the thread catchers?

(only possible for models with a re-
versible floorhead included as standard)
The thread catchers on the suction inlet
of the reversible floorhead can be re-
placed. Check them from time to time
and replace them if the pile has worn
down.

How to replace the thread lifters

(Fig. 28 + 29)
 Use a suitable screwdriver to remove
the thread lifters from the slots.
 Install new thread lifters.
Replacement parts are available from
your Miele dealer or through Miele
Service.
18

Cleaning and care


Always switch off the vacuum
cleaner before cleaning it and unplug
the power cord from the outlet.
Vacuum cleaner and accessories
The vacuum cleaner and all plastic ac-
cessories can be cleaned with a com-
mercially available cleaner suitable for
plastic.
Follow the special cleaning instruc-
tions for the dust container and filter
frame in "Maintenance" and for the
fine dust filter, the pre-filter, and the
fine dust container in "Frequently
asked questions".

Do not use abrasive cleaning
agents, glass cleaning agents, all-
purpose cleaners, or oil-based con-
ditioning agents.

Do not let the vacuum cleaner
get wet. If moisture gets into the vac-
uum cleaner, there is a risk of electric
shock.