ASCOM Ascotel Office 100 Mode D'emploi page 170

Programming your telephone
Programming the Foxkeys
You can also use both Foxkeys as freely programmable keys. The display in standby mode
contains very frequently used numbers or functions which can be conveniently dialled or
executed by means of a single keystroke (of the corresponding Foxkey). If a function is
stored under the Foxkey, its active state is indicated with the "|" symbol.
Storing Numbers/names or functions under the Foxkey
M
Fox1
Notes
• A "Long click" of the Foxkey takes you directly to the Foxkey programming.
• The quality display disappears once both Foxkeys are occupied with a number or
function and a name.
• The quality display is maintained if a blank character is entered with the #-key under
Foxkey 1 or 2 instead of a name.
Key confirmation tone
If you wish, the handset can confirm every keystroke with a short confirmation tone.
M
Note
Whenever you place the handset into the charging base, a short tone always sounds to
confirm this action.
32
Keys
¥
Ok
Fox2
Keys
¥ Ok
¥ Ok
Press the M-key repeatedly in programming
mode until "Keys" appears.
Press the Foxkey under "Keys".
Press the Foxkey repeatedly under "¥"
repeatedly until "Foxkey" appears.
Press Foxkey under "Ok" and then select the
desired key ("Fox1" or "Fox2").
Proceed as under "Hotkey programming."
Press the M-key repeatedly in programming
mode until "Keys" appears.
Press the Foxkey under "Keys".
Press the Foxkey repeatedly under "¥" until
"Confirmation tone" appears and confirm with
"Ok".
Press the Foxkey repeatedly under "¥" to select
"Tone: Yes" or "Tone: No".
Press Foxkey under "Ok" to store the setting
20BA265311/B0