ASCOM Ascotel Office 100 Mode D'emploi page 166

Programming your telephone
Macro language
The macro language allows you to store several functions in succession under one key.
I
Seizes line
X
Hangs up receiver (disconnect)
P
Pause (1 second)
N
Inserts the number entered/displayed in dialling preparation
.
Activates control key
Z
Switches Tone Dial Mode ON/OFF
R
Redials last number dialed
Examples:
I201
Seize and call internal subscriber 201
I*21201X
Seize, divert call to internal subscriber 201, and hang up receiver.
Programming the text display for idle state
You can programme text string for the display in idle state instead of just displaying the
time and date.
Note
A "Long Click" of the C/End key (min. 2 seconds) takes you straight back to the previous
menu.
28
Text Press the Foxkey under "Text" in programming
mode and enter text (maximum of 12
characters).
Ok
Press the Foxkey under "Ok" to store the input in
the memory.
Edit the standby text (if necessary).
C The correction key (C/End) can be used to delete
the characters to the left of the cursor.
Ok
After editing the standby text, press the Foxkey
under "Ok".
20BA265311/B0