ASCOM Ascotel Office 100 Mode D'emploi page 158

Using the extended-feature functions
Transparent mode (Tone dial mode DTMF)
During a call connection the tone dial mode can be used ta activate a function such as,
for example, the remote control of an answering machine.
After carrying out this procedure:
Beginning and ending enquiry calls
The caller you are talking to on the telephone asks a question you cannot answer. You
wish to call a fellow employee for information, without cutting off your connection with
the caller.
1 2
4 5
7 8
0
After obtaining the information you needed:
Note
If the Call key is pressed after an enquiry call, a continuous tone will sound for 10
seconds. Press the Call key while this tone is sounding to reconnect the handset to
the waiting subscriber.
20
1 2 3
4 5 6
7 8 9
0
C
Reset
Enqui
3
6
9
C
"Long Click" of the * key until "Tone dial"
appears. Enter the character sequence of the
desired function.
Press the C-key to switch the tone dial mode off
again
or
Press the Foxkey under "Reset".
Enter the number of the subscriber you wish to
call for the information.
Press the Foxkey under "Enquiry"; the subscriber
is called (while the other connection is put on
hold).
Press the C-key to switch back to your call with
the waiting caller.
20BA265311/B0