Programming Your Telephone - ASCOM Ascotel Office 100 Mode D'emploi

Programming your telephone

Points to consider when programming your phone
Programming is an integral part of the concept of operation. Before you start
programming, read the chapter "Operation: The menu system" at the beginning of these
operating instructions.
Programming mode
You can advance to the beginning of the programming mode in one of two ways:
M M
...
Note
"Long Clicks" depend on the software and the PBX type.
Menu key
With the Menu key (M-key) you can initially access all the programming parameters, once
a parameter has been selected (e.g. Keys), the M-key is used to access the various options
for the selected parameter, such as "Number key" etc.
You can exit either level by pressing the C/End key.
Storing
The contents of a menu option you have programmed or changed yourself will be stored
if you press the Foxkey under "Ok". If you press another key, the programming you have
carried out will not be stored.
20BA265311/B0
"Long click" (at least 2 seconds) of the M-key
M
or
Programming
Press the M-key several times until
"Programming" appears and then press the
Foxkey under "Programming".
21