ASCOM Ascotel Office 100 Mode D'emploi page 167

Programming your telephone
Locking the keypad
You can lock your keypad from accidental activation. Incoming calls are signaled and can
be taken by pressing the Call key. Unlock the keypad prior to making outgoing calls.
After the call you have 5 seconds within which to set up an outgoing call. The key lock
(Variant 1) is reactivated after the 5 seconds.
Notes
• "Long Click 8" (min. 2 seconds) can also be used to switch on Variant 1 of the
key lock.
• "Long Click 9" can be used to switch on Variant 2 of the key lock. This variant is not
automatically disabled when you receive a call and has to be disabled manually (see
above) to be able to answer the call with the Connect key.
20BA265311/B0
Press the M-key repeatedly in programming
M
mode until "Keys" appears.
Keys
Press the Foxkey under "Keys",
"Keylock" appears.
Press the Foxkey under "Ok" to activate the
Ok
"Keylock" feature.
"Unlock" appears on the display.
Unlock Press the Foxkey under "Unlock".
The handset asks you "Unlock keys?" to confirm
that the keypad should be unlocked.
Yes
If you press "Yes", the standby display appears
and the handset is ready again for operation.
29