Telephoning - ASCOM Ascotel Office 100 Mode D'emploi

Telephoning

Answering an incoming call
An incoming call is signalled on the handset.
Pick up a call
Under "Pick_up" the system offers you "Sub" (Subscriber), "Bell" (Central bell with
coded ringing) and "Page" (paging system).
To answer for instance a call directed to a terminal of a absent subscriber, press the M-key
repeatedly until "Pick_up" appears, press the Foxkey at this position and enter the
subscriber number of the called terminal.
During the call
During a call, you can use the M-key to execute other functions, for example, initiating an
enquiry call, muting the microphone ("Mic mute"), switching the volume on the receiver
from "Quiet" to "Loud" (or vice versa)
Ending a call
A call is ended by pressing the Call key or by returning the handset to the charging base.
Of course, the party you are talking to can also end the call. The handset returns to idle
state shortly afterwards.
Adjusting the receiver volume during a call
If you are having difficulty understanding a caller because of the background noise, you
can switch the volume to "Loud".
Quiet
M
Note
The new setting is retained until changed back.
20BA265311/BO
If the handset is not in the charging base, simply
press the Call key to answer the call.
Or
The handset is in the charging base. The call can
be answered directly by lifting the handset (see
"How to program your telephone", "Direct
seizure").
Press the M-key once or twice in order to execute
M
other functions.
Loud Press the M-key repeatedly until "Loud" appears.
Press the Foxkey under "Loud".
11