Installing the microphone
To capture your voice during handsfree
calling, you need to install the microphone
.
Clip (not supplied)
Cautions
• It is extremely dangerous if the cord
becomes wound around the steering
column or gearstick. Be sure to keep it and
other parts from interfering with your
driving operations.
• If any other shock-absorbing equipment is
in your boat, contact the store where you
purchased this unit, or the boat dealer,
before installation.
Notes
• When mounting on the dashboard, remove the
visor clip carefully from the microphone , then
attach the flat-mount base to the microphone
.
• Before attaching the double-sided tape clean
the surface of the dashboard with a dry cloth.
Installation
Removing the trim ring and the
mounting sleeve
Before installing the unit, remove the trim
ring and the mounting sleeve from the
unit.
1
Pinch both edges of the trim ring ,
then pull it out.
2
Insert both release keys until they
click, and pull down the mounting
sleeve , then pull up the unit to
separate.
Face the hook inwards.
19
GB