Playing Back Audio Files Stored On A Usb Memory Device; Using Repeat Play; Using Random Play; About Playback Of Audio From Usb Memory Devices - Pioneer ELITE X-Z9 Mode D'emploi

Home Media Gallery
06
Playing back audio files stored on a USB
memory device
1 Press HOME MEDIA GALLERY .
to select 'USB', and then press \ \ \ \ .
2 Use
The names of folders and files will be displayed.
3 Use to select the folder or music file to play
back, and then press ENTER .
Press the buttons to scroll up and down the list and
select the desired item. When you press \ \ \ \ , playback
starts with the playback screen being displayed for the
selected item. To return to the list screen, press RETURN.
Only the audio files with the
In case of the folders with the
to select the desired folder and audio file.
4 Repeat Step 3 to play back the desired song.
You can perform the following operations with the remote
control of this receiver. Note that some buttons are not
available for operation depending on the category currently
being played back
Button What it does
3 3 3 3
Starts playback.
8 8 8 8
Pauses playback.
7 7 7 7
Stops playback.
4 4
4 4
Skips to the start of the current track, then
to previous tracks.
¢ ¢
¢ ¢
Skips to the next track.

Using repeat play

There are two repeat play options available during playback.
• During playback, press REPEAT to select a repeat
play mode.
Select between 1-track repeat (
all repeat (within current folder) (
display), or repeat off.
Note
1 • Playback stops when the last song in a folder is played back to the end.
• To select another track or folder during playback, press
button).
• To select a track in a category other than the Home Media Gallery, press the TOP MENU button (playback of the current track will stop).
• When a USB memory device with a large capacity is connected, it may take some time to read all the contents.
• This receiver does not support a USB hub.
• Copyrighted audio files cannot be played back on this receiver.
26
En
mark can be played back.
mark, use
1
.
1
lights in the display),
lights in the

Using random play

Use the random play feature to play tracks at random.
You can set the random play option when a disc is
playing.
• Press RANDOM to start random play.
Random play remains in effect (RDM shows in the
display) until you press RANDOM again to cancel.
Tip
• Use the following controls during random play:
Button
and \ \ \ \
About playback of audio from USB memory
devices
The maximum number of levels that you can select in
Steps 3 and 4 is 10. Also, you can display and play back
up to 2000 folders and files within a single folder.
, then perform steps 3 and 4. (To return to the currently playing track, press the DISPLAY
What it does
Selects a new track at random.
Returns to the beginning of the current track.