Playing Sacd/Cd Discs; Playing Discs; Basic Playback Controls; Other Playback Features - Pioneer ELITE X-Z9 Mode D'emploi

Playing SACD/CD discs

04
Chapter 4
Playing SACD/CD discs

Playing discs

The basic playback controls for playing CDs, SACDs, and
MP3/WMA discs are covered here.
1 If the receiver isn't already on, press
ON to switch it on.
Press 0 0 0 0 OPEN/CLOSE to load a disc.
2
Load a disc with the label side facing up, using the disc
tray guide to align the disc. Once properly seated, press
0 0 0 0 OPEN/CLOSE to close the disc tray.
STA NDB Y/ON
Press 3 3 3 3 (play) to start playback.
3

Basic playback controls

The table below shows the basic controls for playing discs.
Button What it does
3 3 3 3
Starts playback.
8 8 8 8
Pauses a disc that's playing, or restarts a
paused disc.
7 7 7 7
Stops playback.
1 1
1 1
Press to start fast reverse scanning.
Press
¡ ¡ ¡ ¡
Press to start fast forward scanning.
Press 3 3 3 3 (play) to resume normal playback.
4 4 4 4
Skips to the start of the current track, then
to previous tracks.
¢ ¢ ¢ ¢
Skips to the next track.
Number Use to enter a track number. Press ENTER
buttons
to select.
(not available • If the disc is stopped, playback starts
with MP3/WMA from the selected track.
data discs) • If the disc is playing, playback jumps to
the start of the selected track.
Note
1 When the REPEAT button is pressed during program play, the programmed contents will be played repeatedly.
2 You can't use random play together with program play.
16
En
IEVE R
SOU ND RETR
OFF
DISP LAY
TIME R
PHO NES
IN
F. AUDI O
USB
3 3 3 3
(play) to resume normal playback.

Other playback features

The following features allow you to customize the
playback order. Note that these features are not available
with data discs (containing WMA/MP3 files).
STANDBY/

Using repeat play

There are two repeat play options available during
1
playback.
• During playback, press REPEAT to select a repeat
play mode.
Select between 1-track repeat (
all repeat (

Using random play

Use the random play feature to play tracks at random.
You can set the random play option when a disc is
playing or stopped.
• Press RANDOM to start random play.
Random play remains in effect (RDM shows in the
display) until you press
Tip
• Use the following controls during random play:
Button

Creating a program list

This feature lets you program the play order of tracks on
a disc.
1 While stopped, press PROGRAM .
2 Use the number buttons and ENTER to select a track
for the current step in the program list.
If you accidently enter the wrong track, press CLEAR to
delete it.
3 Repeat step 2 to build up a program list.
A program list can contain up to 24 tracks.
1
lights in the display),
lights in the display), or repeat off.
2
(or RANDOM again) to cancel.
What it does
Selects a new track at random.
Returns to the beginning of the current track.