Bluetooth ® Playback; Basic Operations; Playing Back - Pioneer XW-SX70 Mode D'emploi

Contents
BLUETOOTH Playback
®
You can wirelessly play the audio on a BLUETOOTH-enabled device, such as a smartphone.

Basic Operations

Press repeatedly
3"
(LIGHTING)
Preparations
≫ ≫
Pioneer XW-SX xxxx
(FAST BLINKING)
10
Playback Voice Functions
≫
Perform the following procedure when this unit is
on.
Pairing
1. Repeatedly press the INPUT button until the " "
LED starts to blink slowly, and change the input
source to "BLUETOOTH".
2. While the " " LED is blinking slowly, press and
hold the INPUT button for about 3 seconds, and
(SLOW BLINKING)
this causes the " " LED to blink rapidly and the
unit enters the pairing mode.
3. Enable (turn on) the BLUETOOTH function of the
BLUETOOTH-enabled device, and then select
this unit from among the devices displayed. If
a password is requested, enter "0000". When
connection is complete, the " " LED changes
from blinking to lighting.
• This unit is displayed as "Pioneer XW-SX70
XXXXXX" or "Pioneer XW-SX50 XXXXXX".
• To connect another BLUETOOTH wireless
(PIN:0000)
technology enabled device, do steps 2 and
on. This unit can store the pairing information
of up to 8 paired devices.
• The coverage area is approx. 48´/15 m. Note
that connection is not always guaranteed with
all BLUETOOTH-enabled devices.

Playing Back

1. Perform the connection procedure on the
Top Panel≫ Front Panel≫ Rear Panel≫
Setup
≫ ≫