Pioneer XW-SX70 Mode D'emploi page 54

Contents
Connecting with an analog audio cable
Preparations
≫ ≫
15
Playback Voice Functions
≫
1. After connecting the LINE OUT jack on the audio
device and the CHAIN IN jack on the rear panel
of this unit using an analog audio cable, turn on
the power of this unit and the connected device.
2. Press the CHAIN button on the rear panel of the
unit so that all of the "AUX", " ", and "USB" LED
light, and turn on the analog chain mode.
• You can also set to the analog chain mode by
repeatedly pressing the INPUT button.
3. Start play on the connected audio device.
Top Panel≫ Front Panel≫ Rear Panel≫
Setup
≫ ≫