Firmware Update - Pioneer XW-SX70 Mode D'emploi

Contents

Firmware Update

The updating function on this unit
This unit has functionality to update the firmware (the system software) by
the USB port. This function can improve various operations and add various
functions.
• For the latest information on updates, visit our company's website. If there is
no update available, updating the firmware of this unit is not necessary.
• While updating the firmware, do not do the following:
– Unplug cables, disconnect USB memory devices, or perform operations
such as turning off the power as these can cause malfunctions
• Updating can take up to a maximum of 5 minutes. Existing settings are
maintained even after updating.
Disclaimer: The program and accompanying online documentation are
furnished to you for use at your own risk.
Our company will not be liable and you will have no remedy for damages for
any claim of any kind whatsoever concerning your use of the program or the
accompanying online documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will our company be liable to you or any third party for any special,
indirect, incidental, or consequential damages of any kind, including, but not
limited to, compensation, reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other reason whatsoever.
Preparations
≫ ≫
31
Playback Voice Functions
≫
Updating the Firmware via USB (
Top Panel≫ Front Panel≫ Rear Panel≫
Setup
≫ ≫
p32)