Pioneer XW-SX70 Mode D'emploi page 75

Contents
Music playback is unavailable on the unit even after successful BLUETOOTH connection
• When the audio volume of your BLUETOOTH-enabled device is set low, the audio may not be played back. Turn up the volume of the
BLUETOOTH-enabled device.
• Depending on the BLUETOOTH-enabled device, the Send/Receive selector switch may be equipped. Select Send mode.
• Depending on the characteristics or specifications of the BLUETOOTH-enabled device, music may not be played back on this unit.
Sound is interrupted
• There may a problem with the BLUETOOTH-enabled device. Check the information on a web page.
The audio quality is poor after connection with a BLUETOOTH-enabled device
• The BLUETOOTH reception is poor. Move the BLUETOOTH-enabled device closer to the unit, or remove any obstacle between the
BLUETOOTH-enabled device and this unit.
„ USB Memory Device
USB memory device not recognized
• Check if the USB memory device is securely inserted to the USB port of the unit.
• Disconnect the USB memory device once from the unit, and then reconnect it.
• Depending on the type of content, the playback may not be performed normally. Check the types of supported file formats.
• Operations of USB memory devices equipped with security functions are not guaranteed.
„ Others
Strange noise can be heard from the unit
• If you have connected another device to the same outlet as this unit, strange noise may occur under the influence of the device. If the symptom
is remedied by removing the power plug of the other device from the outlet, use different outlets for this unit and the device.
Preparations
≫ ≫
36
Playback Voice Functions
≫
Top Panel≫ Front Panel≫ Rear Panel≫
Setup
≫ ≫
( p12)