Pioneer ELITE X-Z9 Mode D'emploi page 42

Additional information
11
Home Media Gallery
Message
P le ase Wai t
C onnecti on Dow n
File For mat Error
Li ce nse Err or
Tr ack Not F ound
S erver Err or
Se rv er Disconnected • The server has been disconnected.
Em pty
Pr e set Not Stored
Ne tw or k Probl em
Out of Range
USB Er ror
XM radio
Message
Check Antenna
C heck XM Tuner
XM Pow er Er ror
Updat ing
No Signal
L oading
Off Ai r
XM – – –
– – – – – –
SIRIUS radio
Message
Ante nna Error
C he ck Sir ius Tuner
Acquir ing Si gnal
Subscription Updating • Unit is updating subscription. Wait until the encryption code has been updated.
Updati ng
Inv alid Channel
42
En
Description
• A component on the network, including a PC, is currently being connected. Wait for a while.
• The selected category or Internet radio station cannot be accessed.
• Cannot be played back for some reasons.
• The license for the contents to be played back is invalid.
• The selected song has not been found anywhere on the network.
• The selected server cannot be accessed.
• There are no files stored in the selected folder.
• The selected Internet radio station is not currently registered and saved.
• There is a problem with the network settings. Check the network settings. The message also
appears then the network settings of this receiver have been changed. In this case, please wait.
• The value entered is beyond the permitted range of the network settings.
• The amount of electricity consumption for a USB memory device is too large.
Description
• The XM antenna is not connected. Check that the XM antenna cable is attached securely.
• The XM Mini-Tuner is not properly connected. Check whether the XM Mini-Tuner is firmly
connected to the receiver.
• A short-circuit occurring in the antenna or surrounding antenna cable. Make sure that there
is nothing unusual with the antenna or antenna cable. Switch the power off then back on again.
• The radio is being updated with the latest encryption code. Wait until the encryption code has
been updated. Channels 00 and 01 should function normally.
• The XM signal is too weak at the current location.
• The receiver is acquiring audio or program information. Wait until the information has been
received.
• The channel currently selected has stopped broadcasting. Select another channel.
• You have selected a channel that does not exist, or that you have not subscribed to. The
receiver will automatically switch to channel 001 (or the last selected channel).
• There is no artist name/feature, song/program title, or channel category associated with the
channel at this time.
Description
• Antenna is not properly connected. Check that the antenna cable is attached securely.
• SIRIUS Connect tuner is not properly connected. Check that the 8 pin mini DIN cable and AC
Adapter are attached securely.
• The SIRIUS signal is too weak at the current location.
• Unit is updating channels. Wait until the encryption code has been updated.
• Selected channel is not available/does not exist. Select another channel.