Explanation Of Type-Identifying Marking And Symbols - Dräger HPS 7000 Notice D'utilisation

Description
3.5 Explanation of type-identifying marking and
symbols
The type identical identification mark is located on the
packaging or the individual components.
3.5.1 Label on fire helmet
1 2 3
D ST
Typ B3 b
5 6-6 6
PA-GF
E2 E3 C * * * *
Revalstraße 1, D-23560 Lübeck, Germany
1 Approval body
2 Standards by which the approval is granted
3 Serial number
4 Various markings (see table below)
5 Helmet type and helmet size H1 or H2
6 Date of manufacture
7 Manufacturer
Marking Explanation of the marking
DST Manufacturer code
Dräger Safety AG & Co. KGaA
B 3b Type: Integrated helmet/helmet model:
HPS 7000
50–60 Head circumference in cm for H1
56–66 Head circumference in cm for H2
PA-GF Code designation of helmet material (glass-
fibre reinforced, thermosetting plastic)
Optional properties and markings
E2 Dielectric strength of the wet fire helmet and
helmet shell
E3 Indication of the non-conductive surface of
the helmet shell
C Chemical permeation resistance
**** The fire helmet is designed for use in
temperatures down to -40 °C
Approved in accordance with MED
18
4 5
HPS 7000 H2
7 6
02621991.eps
3.5.2 Label on the packaging
Marking Explanation of the marking
HPS 7000 Helmet type
H1, H2 Helmet size 1, helmet size 2
REF Order number
LOT Serial number
CE0158 Approval body
Symbol for "See instructions for use"
3.5.3 Marking on the visors
The marking for the visors is engraved. It has the following
meaning:
Marking Explanation of the marking
EN 14458:2004 European standard and the basis for
approval
DST Manufacturer abbreviation
Dräger Safety AG & Co. KGaA
R56555 Example for order number of the visor
12 Example for year of manufacture
+ Symbol indicating suitability for fire fighting
 Symbol for rating as face shield
 Symbol for rating as eye shield
Symbol for "See Instructions for Use"
H1, H2 Visor for helmet size 1 or 2
Optional characteristics and markings
-40 °C Extreme temperature for which the visor is
approved
T Resistance to medium strength impact at
extreme temperatures
K Abrasion resistance
R Enhanced infrared reflectance with gold-
metallised visor
Ω Electrical properties
E3 Dielectric strength of the wet visor
N Resistance to fogging
2C-2 UV protection filter according to EN 170
5-2 Sun protection filter according to EN 172
1 Optical class 1
B Mechanical strength
(impact with medium energy (120 m/s))
2-4 Protective filter against ultraviolet light
4-4 Protective filter against infrared light
4 Welding protection filter
Dräger HPS 7000