Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OBJ_BUCH-2873-001.book Page 6 Wednesday, April 20, 2016 8:54 AM
6 | English
When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Impact Wrenches
Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may con-
tact hidden wiring. Fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Use the battery only in conjunction with your Bosch
product. This measure alone protects the battery against
dangerous overload.
The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Technical Data
Cordless Impact Screwdriver
Article number
Rated voltage
No-load speed
– Setting 1
– Setting 2
Impact rate
– Setting 1
– Setting 2
Maximum torque, hard screwdriving application
according to ISO 5393
* Limited performance at temperatures <0 °C
1 609 92A 2SM | (20.4.16)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Tool holder
2 Locking sleeve
3 Gear selector
4 Fixture for carrying strap
5 Battery unlocking button
6 Battery pack
7 Rotational direction switch
8 On/Off switch
9 "PowerLight"
10 Handle (insulated gripping surface)
11 Double bit*
12 Universal bit holder*
13 Screwdriver bit*
14 Application tool (e. g. an impact socket)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GDR 120-LI
3 601 JF0 0..
V=
12
-1
min
0 – 1300
-1
min
0 – 2600
-1
min
0 – 1900
-1
min
0 – 3200
Nm
100
GDS 120-LI
3 601 JF0 1..
12
0 – 1300
0 – 2600
0 – 1900
0 – 3200
105
Bosch Power Tools
Publicité
Table des Matières
