Complete The Assembly; Adjust Leveling Legs; Workbench Care - Gladiator Garageworks MESA DE TRABAJO MODULAR Instructions D'assemblage

7.
Attach the leveling feet
If not already installed, screw in the four leveling feet.
The leveling feet have a flat side designed for use with an
adjustable wrench, if needed.
IMPORTANT: Screw each leveling foot a minimum of 3.5 turns
into each leg to ensure feet are secure.
WARNING
Excessive Weight Hazard
Use two or more people to move and assemble
workbench.
Failure to do so can result in back or other injury.
1.
Stand up workbench
Using two or more people, stand the workbench upright
and place it in its final location.
1. Wash the workbench with a mild detergent and warm water. Do not allow water to remain on the workbench for any length of time.
2. Rinse completely and dry thoroughly.
6

Complete the Assembly

Adjust the leveling legs as needed.
IMPORTANT: When adjusting the leveling legs, be sure they
are at least 1/4" (6.35 mm) deep into the workbench leg.

Workbench Care

2.

Adjust leveling legs