Cabinet/Locker Safety; Assembly Instructions; Tools And Parts; Cabinet Use Requirements - Gladiator Garageworks GAMGD027LG01 Instructions D'assemblage

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.

Tools and Parts

Check that you have everything necessary for correct assembly.
Proper assembly is your responsibility.
Tools Needed:
⁷⁄₁₆ in. Wrench
Parts Supplied:
Keys (2)
Top mat (1)
Drawer liners (5)
"L"-shaped bumpers (2)
Hex-key wrench (1)
Socket-head cap screws (8)
Washers (8)

CABINET/LOCKER SAFETY

Your safety and the safety of others are very important.

ASSEMBLY INSTRUCTIONS

Flat-blade screwdriver
Rigid casters (2)
Swivel casters (2)
¹⁄₄ in. - 20 Self-locking
nuts (16)
¹⁄₄ in.- 20 x ¹⁄₂ in.
Carriage-head bolts (16)
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.

Cabinet Use Requirements

Intended for use in a garage.
Maximum weight limit is 65 lbs (29 kg) for the tray/shelf.
Maximum weight limit is 1,400 lbs (635 kg) lbs for the cabinet.

Unpack the Cabinet

NOTE: Keep the packing materials to cushion the cabinet during
assembly and then discard.
1. Remove the keys and unlock the drawers.
2. Verify contents (see "Parts Supplied").
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gamgb027lg01Gamgb027lg0

Table des Matières