DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance page 95

7. PROGRAM
After pressing the ENTER key we have four options:
7.1 Create program
This command allows for a new programme to be created. The steps to follow are the
following:
After selecting CREATE PROGRAM, press the ENTER key and the lowest programme
number to be created will be displayed:
With the INC (∧) and DEC (∨) keys, the programme number will be increased or
decreased. Once the programme number has been selected, press ADVANCE (>>) and
the first available name will be displayed:
With the INC (∧) and DEC (∨) keys, the name varies. Once the name has been selected,
press ADVANCE (>>) and the first available phase and name will be displayed:
CREATE PROGRAM
COPY PROGRAM
CHANGE PROGRAM
ERASE PROGRAM
CREATE PROGRAM
Program:
CREATE PROGRAM
Program:
Program name
WHITES
Program:
WHITES
Phase:
Pre-wash
51
17
21
90 ºC
21
90 ºC
1