1- Remove - DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance

7.3.3 Remove
This command allows for a programme phase to be removed. The steps to follow are the
following:
After selecting the phase to be removed press ENTER and select REMOVE.
If you wish to return to the previous menu you should press the ESC key.
7.4 Erase program
This command allows for erasing any programme created by the user. The steps to follow
are the following:
After selecting ERASE PROGRAM, press the ENTER key and the name of the first
erasable programme saved in the memory will be displayed.
With the INC (∧) and DEC (∨) keys, all the erasable programmes will be displayed. Once
the programme has been selected, press ENTER.
If you wish to return to the previous menu you should press the ESC key.
Remove phase?
ENTER: Accept
ESC: Cancel
ERASE PROGRAM
Program No.:
BLANKETS
Erase program?
ENTER: Accept
ESC: Cancel
56
17