DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance page 70

Heating system fault
Message:
Meaning:
Options:
Water inlet fault
Message:
Meaning:
Options:
Drainage fault
Message:
Meaning:
Options:
Motor overheating
Message:
Meaning:
Options:
Maximum temperature
Message:
ALARM E5
"FAULT HEATING"
This message is shown when, in spite of activating the heating output,
the water temperature has not increased during a certain preestablished
period of time.
- Press ENTER: the programme continues to operate in the next phase.
- Press ESC: programme ends.
ALARM E4
"FAULT WATER INLET"
This message appears when, in spite of activating the corresponding
solenoid valves' outputs, the water level inside the tub has not increased
during a certain preestablished period of time.
- Press ENTER: the programme continues to operate.
- Press ESC: programme ends.
ALARM E3
"FAULT DRAIN"
This message is displayed when, in spite of deactivating the emptying
valve output, the water level inside the drum has not decreased during a
preestablished period of time.
- Press ENTER: the programme continues to operate.
- Press ESC: programme ends.
ALARM E9
"MOTOR HEATING"
This message appears when the thermal protection of the washing
machine's motor is detected to have not been activated.
- Press ENTER: the programme continues to operate.
- Press ESC: programme ends.
ALARM E6
26