Copy Block - DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance

With the INC (∧) and DEC (∨) keys, the corresponding value is modified; with the
ADVANCE key (>>) you move to the next parameter. Once all the parameters have been
created, press ENTER.
If you wish to return to the previous menu you should press the ESC key.

6.2 Copy block

This command allows for a block to be copied from an existing one. The steps to follow
are the following:
After selecting COPY BLOCK, press the ENTER key and the number of the first block
saved in the memory will be displayed with its corresponding text as well as the number
of the destination block:
With the INC (∧) and DEC (∨) keys, the number of the source block will be increased or
decreased. Once the block number has been selected, press ENTER.
If you wish to return to the previous menu you should press the ESC key.
Save block?
ENTER: Accept
ESC: Cancel
COPY BLOCK
Orig. block:
Text: Pre-wash 40 ºC
Dest. block:
Copy block?
ENTER: Accept
ESC: Cancel
49
1
35