Create Name - DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance

3. MAIN PROGRAMMING MENU
After turning the machine on, press the INFO key:
Press DEC (∨) twice and after ENTER to access the main programming menu:
4. PROGRAM NAME
After pressing the ENTER key we have three options:

4.1 Create name

This command allows us to create the programme name. The steps to follow are the
following:
After selecting CREATE NAME, press the ENTER key:
→SEE PHASES
DELAYED START
PROGRAMMING
CONFIGURATION
→PROGRAM NAME
PHASE NAME
BLOCK
PROGRAM
→CREATE
NAME
COPY NAME
CHANGE NAME
CREATE NAME
A
40