Bluetooth; Preparing A Bluetooth Device; Pairing And Connecting With A Bluetooth - Sony XM-GS6DSP Mode D'emploi

 3-way speaker system
With the input connection  (page 11)
Using Sony 3 Way Component Speaker System 
XS-GS1631C is recommended.
Tweeter (min. 4 Ω)
Midrange speaker (min. 4 Ω)

Woofer (min. 2 Ω)
Note
When making this connection, set the filter switches to
the following positions:
– HIGH PASS FILTER: ON
– FILTER: HPF+LPF
– LOW PASS FILTER: ON
Speaker cord connection
Connect the cords properly to speakers.
1
FL Front speaker (left)
2
3
FR Front speaker (right)
4
5
RL Rear speaker (left)
6
7
RR Rear speaker (right)
8
 White
 White/striped
 Gray
 Gray/striped
 Green
 Green/striped
 Purple
 Purple/striped

BLUETOOTH

Preparing a BLUETOOTH Device

You can enjoy music on a BLUETOOTH compatible
device such an iPhone/Android smartphone
(hereafter "BLUETOOTH device" if not otherwise
specified). For details on connecting, refer to the
operating instructions supplied with the device.
Before connecting the device, turn down the
volume of the BLUETOOTH device; otherwise, a
loud sound may result.
(Available only when the SELECT switch is set to the
"2V" or "5V" position.)
Pairing and connecting with a
BLUETOOTH device
When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
1
Place the BLUETOOTH device within 1 m
(3 ft) of this unit.
2
Press and hold PAIRING for 2 seconds.
The indicator flashes quickly while the unit is
in pairing standby mode.
3
Perform pairing on the BLUETOOTH
device so it detects this unit.
4
Select [XM-GS6DSP] shown in the display
of the BLUETOOTH device.
If your model name does not appear, repeat
from step 2.
5
If passkey input is required on the
BLUETOOTH device, input [0000].
When pairing is made, the
slowly.
6
Select this unit on the BLUETOOTH device
to make the BLUETOOTH connection.
The indicator lights up when the connection
is established.
Note
While connected to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, press PAIRING to enter the pairing standby
mode and search for this unit from another device.
indicator flashes
15
GB