Speaker Connections - Sony XM-GS6DSP Mode D'emploi

Speaker connections

Set the HIGH PASS FILTER switch, FILTER switch and
LOW PASS FILTER switch on the control panel to the
appropriate positions according to the speaker
system.
Also, refer to the manual supplied with your
speakers for further details.
 4.1ch speaker system with a bridged
subwoofer connection
With the input connection  or  (page 10, 11)
Front speaker (min. 4 Ω)
Rear speaker (min. 4 Ω)

Notes
 When making this connection, set the filter switches
to the following positions:
– HIGH PASS FILTER: OFF
– FILTER: OFF
– LOW PASS FILTER: ON
 When adjusting the volume balance of the front
speakers, rear speakers and subwoofer while the unit
is in 2ch mode (DSP mode), operate your iPhone/
Android smartphone to adjust the [Fader], [Balance]
and [Subwoofer Level] settings of the "Sony | Music
Center" application.
14
GB
Subwoofer (min. 2 Ω)
 2-way speaker system with a bridged
subwoofer connection
With the input connection  or  (page 10, 11)
Tweeter (min. 4 Ω)
Woofer (min. 4 Ω)

Note
When making this connection, set the filter switches to
the following positions:
– HIGH PASS FILTER: ON
– FILTER: HPF+LPF
– LOW PASS FILTER: ON
Subwoofer (min. 2 Ω)