Okamura Finora Mode D'emploi page 15

GB
Part
Frame
Backrest Backrestframe
Decoration panel
Mesh type Mesh frame
Upholstered type Inner shell
Seat
Common to all
Seat frame
models
Body
Support
base
Cover
Armrest body
Mechanical
Adjustable arm section
Structural
parts Pad
Arm
Body
Fixed arm
Pad
Armless Side cap
Polished type
5-leg type
Leg Coated type
Hanger
Movable portion
Lumbar support
Body
Option
Body
Headrest
Attaching portion
Mesh
Covering
material
Cloth
Seat
Cushion
material
Headrest
∗ >XX< indicates the materials of the parts. This information is useful for recycling.
∗ Please understand that product specifications might change without prior notification due to improvements made
to the product.
27
Materials
Materials Surface finishing
Die-cast aluminum >ADC< Polyester coating
Polyamide resin >PA<
Polycarbonate resin >PC<
Polyamide resin >PA<
Polypropylene resin >PP<
Polyamide resin >PA<
Metal (aluminum) >ADC< Polyester coating
ABS resin
Polypropylene resin >PP<
Metal (steel)
Thermoplastic polyurethane resin
>TPU<
Metal (aluminum) >ADC< Polyester coating
Thermoplastic polyurethane resin
>TPU<
Polypropylene resin >PP<
Metal (aluminum) >ADC< Mirror finishing
Metal (aluminum) >ADC< Polyester coating
Polyamide resin >PA<
Polyamide resin >PA<
Olefin-based resin
Polypropylene resin >PP<
Polyamide resin >PA<
Polyester
Polyester
Urethane foam
Urethane foam
GB
Problem
-
The seat cannot be lifted up.
-
-
-
-
The seat cannot be lowered.
-
The seat slide lever does not
-
work.
-
-
The backrest does not
recline.
-
-
Casters do not move
smoothly.
-
Casters are slippery.
-
-
Chair makes noise.
-
-
∗ * Please contact an official dealer.
-
-
-
-
Troubleshooting
Check Solution
Are you sitting on the seat
Adjust the seat height while
when adjusting the seat
not seated on the seat.
height?
Is the seat height in its The seat cannot be lifted up
highest position? beyond the highest position.
Are you sitting on the front Sit in the center of the seat
edge of the seat? while adjusting.
Is the seat height in the The seat cannot be lowered
lowest position? beyond the lowest position.
Are you sitting on the seat
Adjust the seat depth while
when adjusting the seat
not seated on the seat.
depth?
Turn the dial
The dial on the bottom right
counterclockwise, and lean
of the seat is locked.
against the backrest.
The reclining tension
Turn the reclining tension
adjustment dial is set to
adjustment dial to the weak
the strong tension (back)
tension (front) position.
position.
Are they tangled with lint or Remove lint or wool or
wool? replace the casters.
Are you using urethane
casters on hard floors such Use soft casters.
as a plastic tile floor?
Visit a retail shop or the
-
nearest branch.
Page
14
14
14
14
15
16
17, 18
*
*
*
28