Special Accessory Installation - GO2 RH 2 Mode D'emploi

5. For attachment in front of the axle on the
AL-KO chassis M, with a permissible gross weight of up
to 1800 kg and adjustable beams
– 5a. In order to compensate for overlapping frame edges
when the chassis is set to the minimal length, the adapter
kit AL-KO M short to 1800 kg must be used.
– 5b. In order to compensate for overlapping frame edges, the
adapter kit AL-KO M to 1800 kg must be used.
6. Installation on Eriba Touring chassis
For the Eriba Touring chassis, it essential to use the
Eriba Touring adapter kit.
7. Installation on the Eriba Touring Troll chassis
For the Eriba Touring Troll chassis, the Eriba Touring Troll
adapter kit is absolutely essential.
8. Installation on chassis with L-profile and with a limited
amount of space
The short mounting system is required to compensate for the
height (30 or 60 mm) with substructures such as tanks.

Special accessory installation

1. 30 mm spacer kit
For compensating for height on caravans with a frame height of
< 170 mm to 140 mm,
part no. 60030-95000.
Figure 7
2. 60 mm spacer kit
For compensating for height on caravans with a frame height of
< 140 mm to 110 mm,
part no. 60030-95100.
Figure 8
3. Low chassis kit
For compensating for height on caravans with a frame height of
less than 110 mm and / or for bridging struts,
part no. 60010-64900.
Figure 9
22
RH 2 Manoeuvring Assistant
If a low chassis kit is used in Germany, acceptance by a
vehicle expert is required.
4. Low chassis kit short short
For compensating for height on caravans with a frame height of
less than 110 mm,
part no. 60030-37600.
Figure 10
If a low chassis kit is used in Germany, acceptance by a
vehicle expert is required.
5. Adapter kit AL-KO Vario III/AV
Essential for caravans with AL-KO Vario III/AV chassis
(frame thickness less than 2.8 mm),
part no. 60010-21500.
Figure 11
6. Adapter kit AL-KO M short to 1800 kg
For chassis with a permissible gross weight of up to
1800 kg For compensating for frame edges for caravans with
AL-KO chassis M. Adapter kit is required for attachment in front
of the axle when the chassis is set to the minimum length,
part no. 60031-00132.
Figure 12
7. Adapter kit AL-KO M to 1800 kg
For chassis with axial displacement with a permissible
gross weight of up to 1800 kg
For compensating for frame edges for caravans with
AL-KO chassis M. The adapter kit is needed for mounting in
front of the axle, part no. 60030-38600.
Figure 13