Alarm Setting; Snooze Function; Kitchen Timer; Setting And Operating The Kitchen Timer - SilverCrest SKR D1 A1 Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
Checking the remaining sleep time: The interval
 
remaining is shown in the display .
Cancelling the sleep timer: Press and hold
 
TIMER/SLEEP 8 repeatedly until
appears in the display .
˜ Alarm setting
In STANDBY or ON mode, press and hold
 
MENU/INFO 7 for 2 seconds .
Turn SELECT/ENTER/SNOOZE 1 to select
 
<SYSTEM> .
Push SELECT/ENTER/SNOOZE 1 to
 
confirm .
Turn SELECT/ENTER/SNOOZE 1 to select
 
<Alarm> .
Push SELECT/ENTER/SNOOZE 1 to select
 
Alarm 1 or Alarm 2 .
Push SELECT/ENTER/SNOOZE 1 to set
 
the hours .
Push SELECT/ENTER/SNOOZE 1
 
repeatedly to set the minutes .
Push SELECT/ENTER/
 
SNOOZE 1 repeatedly to
select the alarm duration (options:
15/30/45/60/90/120 minutes) .
Push SELECT/ENTER/SNOOZE 1
 
repeatedly to select the alarm sound (options:
<Buzzer>, <FM>, <DAB>) .
Push SELECT/ENTER/SNOOZE 1 to
 
set the alarm repetition (options: <Once>,
<Daily>, <Weekdays>, <Weekends>) .
Push SELECT/ENTER/SNOOZE 1 to select
 
<Alarm
off> or
<Alarm
When the alarm is successfully set, <Saved>
 
appears on the display 4 .
Sleep off
on> .
NOTES:
When the alarm sounds, press
 
the alarm off .
When Alarm 1 sounds,
 
display 4 .
The volume gradually increases .
 
After the alarm duration has elapsed,
 
the product will return to standby mode
automatically .
<FM> or <DAB> alarm: When the alarm
 
sounds, the radio station appears on the
display 4 .
˜ Snooze function
In ON mode, press and hold SELECT/
 
ENTER/SNOOZE 1 while the alarm is
ringing . The alarm reactivates after approx .
9 minutes .
˜ Kitchen timer
The product has a practical kitchen timer with
which you can monitor cooking and baking times,
for example . You can set 2 kitchen timers .
˜ Setting and operating the

kitchen timer

Press TIMER/SLEEP 8 to toggle between
 
Timer 1 and Timer 2 .
Turn VOLUME/START/RESET 6 to select
 
the countdown time .
Push VOLUME/START/RESET 6 to
 
confirm . T1 or T2 appears on the display 4 .
The countdown starts immediately .
Press TIMER/SLEEP 8 to check the
 
countdown time .
A warning signal sounds at 30, 15, 10 and
 
5 seconds before the countdown elapses .
3 to turn
flashes on the
GB/IE
37

Publicité

Table des Matières
loading

Table des Matières