Auto Ensemble Memory Entry; Recalling A Preset Service - Kenwood KTC-9090DAB Mode D'emploi

2
Receive the service to be preset.
3
Hold down the preset button ([1] - [6]) to
preset the service for two seconds or
more.
The service is preset when the number
of the button blinks once.
Multi Key of A group
Before proceeding to Step 3 descried
above, change sections to the preset
section.
Refer to "Station Preset Memory" of
the tuner function. See the control unit
instruction manuals for its operations.
G group
1
Press the [FM] button to select the
preset band.
2
Enter Memory mode
Press the [#3] button for at least 1
second.
"Preset Memory" is displayed.
3
Receive the service to be preset.
4
Select the preset number
Press the [FM] or [AM] button.
5
Put the service in the memory
Press the [#3] button for at least 2
seconds.
The preset number display blinks 1 time.
6
Repeating steps 3 to 5 and putting the
desired service in the memory.
On each band, 1 service can be put in
the memory on each [#1] — [#6].
7
Exit Memory mode
Press the [#3] button.
NOTE
• Up to 6 services can be preset in each of
preset bands DAB1, DAB2 and DAB3.
• As the preset memory consists of the
storage of services, the distinction of
Primary and Secondary service
components is not preset. The Primary
service component is received when a
service is recalled.
• If no Service is being received, it cannot
be stored in memory.
• Preset bands DAB1, DAB2 and DAB3
refer to the bands for use in preset
memory and do not mean different
receiving bands.
• G: You can set up to 6 memories even
on a control unit with 8 preset
buttons.

Auto Ensemble Memory Entry

Ensembles that can be received through
the pre-set band currently being heard
are automatically stored in memory one
after another. A representative Service of
the Ensembles stored in memory can be
called up with a one-touch operation.
This function is convenient in such cases
as when on a journey where one has no
idea what ensemble is available. Up to 6
ensemble can be stored this way.
Preset button: [1] [2] [3] [4] [5] [6]
1
Select the preset band for auto
ensemble memory entry.
2
Auto ensemble memory entry allows
"Auto Memory"/"A-MEMORY" to be
displayed.
3
Press the setting button of the menu
items on the control unit for at least 1
second to start the Auto ensemble
memory entry.
After storing in the memory finishes, the
number of the pre-set buttons and the
ensemble label are displayed.
E and F group
1
Touch [AME].
2
Touch [4] or [¢] to start auto
ensemble memory entry.

Recalling a Preset Service

Press the [FM] / [BAND] / [DB] button to
select the preset band, and press the
desired preset number button ([1] - [6]).
The number of the pressed button is
shown in the display.
Multi Key of A group
Change sections to the preset section
before pressing preset button.
Refer to "Preset Tuning" of the Tuner
function. See the control unit instruction
manuals for its operations.
G group
1
Press the [FM] button to select the
preset band.
2
Call up the service
Press the [#1] — [#4] button.
The services are called up as shown
below.
ABCÎEFG
ABCDEFG
13