Installation Procedure - Kenwood KTC-9090DAB Mode D'emploi

Installation Procedure

1. To prevent short circuits, remove the key
from the ignition and disconnect the -
terminal of the battery.
2. Install the DAB antenna and connect the
antenna cable to the DAB hideaway tuner.
3. Connect the DAB hideaway tuner and the
control unit using the provided DAB
connection cable.
4. Make the proper input and output cable
connections for each unit.
5. Install the unit in your car.
6. Reconnect the - terminal of the battery.
7. Press the reset button on the control unit.
2CAUTION
• Do not connect the DAB control cable
whilst the control unit is turned ON.
• Be sure to press the reset button on the
control unit after installation.
• If your car is not prepared for this special
connection-system, consult your
Kenwood dealer.
• Make sure that all cable connections are
securely made by inserting jacks until
they lock completely.
• Do not let unconnected cables or
terminals touch metal on the car or
anything else conducting electricity. To
prevent short circuits, also do not
remove the caps on the ends of the
unconnected cables or the terminals.
• Some disc changers need conversion
cables for connection. See the section
on "Safety Precautions" for details.
• Insulate unconnected cables with vinyl
tape or other similar material.
• Be sure to use the provided DAB
antenna (Accessory 7, 8) as the DAB
antenna. Using other antenna than
provide may lead to malfunction.
• Take care so that the antenna cable and
other connection cables are not caught
by mobile parts. Otherwise cable
disconnection or other trouble may
result.
• Do not apply too much force on the
antenna cable, other connection cables
and connectors by bending a cable, etc.
Otherwise cable disconnection or other
trouble may result.
• Securely fasten the screws that fix the
DAB antenna as well as the screws of
the DAB antenna itself. Screws that
loosen introduce the danger of the
antenna coming apart during travel.
• DC voltage is output from the DAB
antenna terminal of the DAB hideaway
tuner to supply power to the DAB
antenna. Be sure to connect the
supplied DAB antenna only. Otherwise,
the unit may be damaged.
• After the unit is installed, check whether
the brake lamps, indicators, wipers, etc.
on the car are working properly.
25