Dab Features (Search); Programme Type (Pty) Function - Kenwood KTC-9090DAB Mode D'emploi

DAB features (Search)

Programme Type (PTY) Function

This function permits desired programme
types from within the received Ensemble
to be searched and monitored.
1
Entering PTY Selection Mode:
Press the [38] (PTY) button.
If your control unit does not have [38]
(PTY) button, press [FM] (■PTY) button
for at least 1 second.
As for G-group, press the [#2] (■PTY)
button for at least 1 second.
"PTY" is displayed and the Programme
Type Selection (PTY) Mode entered.
NOTE
This function cannot be used during the
interruption of the announcement/PTY
Watch.
2
Select the programme type
• Each time the [FM] / [AM] button is
pressed the programme type switches.
As for the available programme type,
refer to the "Programme Type Display".
• Press the pre-set button for direct
selection. Default settings are pre-set
as follows:
[1].Music
[3].News
[5].Serious Classics [6].Varied
NOTE
Changing the preset programme
types
Select the programme type to be preset
and hold down a preset button ([1] - [6]) for
two seconds or more. The previously
preset programme type is cleared and
replaced with the newly selected
programme type.
As for G-group, refer to "Program Type
preset" of the RDS function. See the
control unit instruction manuals for its
operations.
3
Search a service of the selected
programme type
Press the [4] / [¢] buttons to start
searching for the selected programme
type. When the selected programme
type is found, the letters indicating the
result of the search (Service label, etc.)
are displayed and the programme is
received.
NOTE
If the selected programme type is not
found, the message ( "NO PTY", etc.) is
displayed.
When searching for a service of another
programme type, repeat procedures 2 and
3.
ABCD‰ÏG
[2].Speech
[4].Other Music
Switching to Another Service:
Repeat procedure 3.
Another service of the same programme
type will be searched.
Cancelling Search In the Middle:
Press the [38] (PTY) button.
If your control unit does not have [38]
(PTY) button, press [FM] (■PTY) button
for at least 1 second.
As for G-group, press the [#2] (■PTY)
button for at least 1 second.
NOTE
This setting is valid only with the DAB
source. The similar function for the RDS
source can be set during reception of an
FM station in the tuner mode.
Searching by programme type
and language:
1
Press the [DISP] / [SCRL] button whilst
in programme type selection mode.
2
Selecting a language:
Each time the [FM] / [AM] button is
pressed the language is switched.
As for the available languages, refer to
the "Language Filter Search Mode"/
"Language Filter Select Mode". (page 17)
3
Searching by the selected programme
type and language:
Press the [4] / [¢] button to start
searching.
4
Exiting: Press the [DISP] / [SCRL]
button.
Languages to be displayed:
A, B + and G group
Select English, French, German, Dutch,
Spanish, Portuguese, Norwegian or
Swedish in "Language Filter Search
Mode"/ "Language Filter Select Mode" to
display in the selected language. (page
17)
B, C and D group (except for B + )
1
B: Press the [DISP] button whilst in
programme type selection mode.
C, D: Press the [38](PTY) button for at
least 1 second whilst in
programme type selection mode.
2
Press the pre-set button of the desired
language.
English is [1], French is [2], German is
[3] and Swedish is [4].
3
Exiting: Press the [DISP] button.
AB + ÇΉÏG
ABCD‰ÏG
15