Traffic Announcement Function; News Bulletin Function With Announcement News Timeout Setting; Presetting Volume For Announcement - Kenwood KTC-9090DAB Mode D'emploi

display item means that interruption of
the item is permitted.
5
Exit menu mode.
F group
Setting can be carried out on the DAB
Setup Screen. (page 9)
Exiting the interruption:
Switch the setting of the interruption of
the item being interrupted from
permission to prohibition.
NOTE
• The setting of the interruption of the
"Alarm" is always ON. Switching to OFF
is not possible.
• During an interruption another
announcement cannot interrupt the item.
Languages to be displayed
(except for F group)
Select English, French, German, Dutch,
Spanish, Portuguese, Norwegian or
Swedish in "Language Filter Search Mode"/
"Language Filter Select Mode" to display in
the selected language. (page 17)

Traffic Announcement Function

Traffic information can be received
automatically. It is also possible to play a
tape or disc whilst waiting for a traffic
announcement programme to start.
Turning Traffic Announcement Function
On/Off:
1
Set this function referring to the "Traffic
Information Function" of the control unit.
If the [TI] button is not provided set
through the menu.
Traffic Announcement Function is
displayed as "TI".
2
When the function is on, the TI indicator
is turned on.
In the case of an Ensemble provider
supporting the Traffic Announcement,
the TI indicator is turned on.
When a Traffic Announcement
programme starts, "TRAFFIC INFO"/
"TRAFFIC" is displayed, adjusting the
volume to the set level.
When a traffic information programme
starts whilst playing a tape or a disc,
automatic switching to the traffic
information happens.
Either an ending of the traffic
ÅıCDEÏÌ
information or deterioration of the
receiving signal results in switching back
to the previous source.
3
Exit menu mode.
NOTE
• This setting is valid for both the DAB and
RDS sources.
• As for D group, turning the function ON
causes the TI indicator light up and an
interruption causes the TA indicator to
turn on. In the case that the Ensemble
supports the Traffic Announcement, the
TP indicator turns on.
News Bulletin Function with
Announcement News Timeout
Setting
The News Bulletin information can be
listened to in priority by overriding
another programme or source. When this
function is turned on, the interval for
allowing the overriding of news (news
timeout period) can be set in the range
between 10 and 90 minutes.
1
Set this function referring to the "News
Bulletin Function with PTY News
Timeout Setting" of the control unit.
2
Starting the News Announcement
programme causes the NEWS indicator
to blink, adjusting the volume to the set
level.
NOTE
• This setting is valid for both the DAB and
RDS sources.
• This function cannot be used if the "RDS
function" and the "News Bulletin Function
with PTY News Timeout Setting" are not
provided for in the control unit.
• As for E group, refer to "News Bulletin
Function with PTY News Timeout
Setting" of the RDS function.
Presetting Volume for
Announcement
Pre-setting the volume unique to
announcements is possible.
1
Receive a DAB station.
ÅıCDEÏÌ
ABCDEFG
19