Function Settings - Kenwood KDC-248U Mode D'emploi

Function settings

1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
Repeat step 3 until the desired item is selected/activated.
Press to return to the previous item.
4 Hold to finish the procedure.
[AUDIO CTRL] : While listening to any source except in STANDBY state...
Item
SUB-W LEVEL –15 — +15 (Preset: 0): Adjusts the subwoofer output level.
BASS BOOST B.BOOST LV1 */ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels.
SYSTEM Q NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the
music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS LEVEL –8 — +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before making an
adjustment, select the source you want to adjust.)
MID LEVEL
TRE LEVEL
BALANCE L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.
FADER R15 — F15 (Preset: 0): Adjusts the rear and front speaker output balance.
SUB-W SET ON *: Turns on the subwoofer output. ; OFF: Cancels.
DETAIL SET LPF SUB-W:
SUB-W PHASE: REV (180°)/ NORM (0°) *: Selects the phase angle of the subwoofer output to be in line
SUPREME SET: ON *: Creates realistic sound by interpolating the high-frequency components that are lost in
VOL OFFSET:
(Preset: 0)
[SUB-W LEVEL/ SUB-W SET/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (page 7)
[SUB-W LEVEL/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].
[SETTINGS]
Item
AUX NAME AUX */ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component.
(Selectable only if "AUX" is selected as the source.)
CLOCK CLOCK ADJ:
DISPLAY DIMMER SET: ON: Dims the display illumination. ; OFF *: Cancels.
TEXT SCROLL: AUTO */ ONCE: Selects to scroll the display information automatically, or scroll only once. ;
Selectable setting (Preset: *)
THROUGH *: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies
higher than 85 Hz/ 120 Hz/ 160 Hz are cut off.
with the speaker output for optimum performance. (Selectable only if a setting other than
[THROUGH] is selected for [LPF SUB-W].)
MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/WMA
disc or a USB device, except iPod.)
–8 — +8 (for AUX) ; –8 — 0 (for other sources): Presets the volume adjustment level of
each source. The volume level will automatically increase or decrease when you change the
source. (Before making an adjustment, select the source you want to adjust.)
Selectable setting (Preset: *)
(For details, see page 6.)
OFF: Cancels.
13