Direct Music Search; Function Settings - Kenwood KDC-X596 Mode D'emploi

Direct Music Search

• Not available if Random Play is selected.
• Not applicable for iPod and Kenwood Music
Editor.
1 Press DIRECT to enter Direct Music
Search Mode.
"– – –" appears.
2 Press the number buttons to enter the
track number.
3 Press 4 / ¢ (+) to search for the
music.
To cancel the Direct Music Search Mode,
press or EXIT.

Function settings

1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [AUDIO CONTROL] or [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See the following table for selection.
Repeat step 3 until the desired item is selected/activated.
Press to return to the previous item.
4 Hold to finish the procedure.
[AUDIO CONTROL] : While listening to any source except in STANDBY state...
Item
SUB-W LEVEL –15 — +15 (Preset: 0): Adjusts the subwoofer output level.
BASS LEVEL –8 — +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before
making an adjustment, select the source you want to adjust.)
MID LEVEL
TRE LEVEL
16
In Station Search Mode (while listening to
"PANDORA" source...)
5 / ∞
: • Selects [A–Z] or [BY DATE].
ENT : Confirms selection.
EXIT : Cancels Station Search mode.
Selectable setting (Preset: *)
• Selects item.