Dab Features (Step Up); Regional Announcement Function; Dynamic Range Control (Drc); Automatic Switching Dab Priority - Kenwood KTC-9090DAB Mode D'emploi

DAB features (Step Up)

2
Adjust the volume for the
announcement.
3
Press the [TI VOL ADJ] button for at
least 2 seconds. An indication of the
volume blinks once and the volume is
stored in the memory. Announcements
can be heard at this volume.
A + and G + group
During reception of announcement the
adjusted volume is automatically
remembered, and the next time it
switches to announcement it's
automatically the remembered volume.
NOTE
• This setting is valid for both the DAB and
RDS sources.
• This function cannot be set if the "Pre-
setting Volume for Traffic
Information/News" function of the RDS
function is not provided for in the control
unit. (except for A + , G + )
• This function does not reduce the
listening volume in the DAB and tuner
modes. The volume set here is recalled
only when it is larger than the volume
which is currently used in the DAB or
tuner mode.
• Setting the volume unique to the
announcement and turning
Announcement select mode on with the
minimum volume results in only the
desired announcement being heard.
• As for E and F group, refer to "Pre-
setting the Volume for Traffic
Information/News" of the RDS function.
Regional Announcement
Function
The interruption of the announcement
such as the Alarm of either a restricted
region where the programme is being
received (regional restriction ON) or all
regions (regional restriction OFF) can be
selected.
Turning Regional Announcement Function
On/Off:
1
Display the menu mode using the
control unit and select a setting item.
2
Switching the setting.
Switch the setting of menu items.
"REG ASW"/ "REG INT"/ "REGA"/ "REG"/
"Regional ASW"
20
ABCDEFG
"ON": Regional on
"OFF": Regional off
3
Exit menu mode.
E and F group
Set this function on the DAB Setup
Screen. (page 8 - 9)
NOTE
This setting is valid only with the DAB
source. The similar function for the RDS
source can be set during reception of an
FM station in the tuner mode.

Dynamic Range Control (DRC)

In the case that the producer of a
programme wants to adjust dynamic
range, DRC information is transmitted.
Whether to receive the DRC or not can be
selected and set according to listeners'
preference.
1
Display the menu mode using the
control unit and select a setting item.
2
Switching the setting.
Switch the setting of menu items.
"DRC ON": Functioning
"DRC OFF": Not functioning
3
Exit menu mode.
E group
Set this function on the DAB Setup
Screen. (page 8)
F group
Touch [DRC] on the DAB Control Screen.
NOTE
• As the dynamic range is changed based
on the Dynamic Range Control
information sent from a Service provider,
this function does not work whilst no
information is being transmitted from the
Provider.
• When the Dynamic Range Control (DRC)
is set ON, the sound volume is
somewhat lower.
Also, if the DRC data can't be cleanly
demodulated, the DRC may be invalid.
Automatic Switching DAB
priority
RDS/DAB provides information when the
ABCDEFG
AıÇΉFG